Instructions / Assembly

ITEM#: JYL9800A
Please read instruction before commencing installation and retain for future references.Electrical products can cause death
or injury, or damage to property. If in any doubt about the installation or use of this product, consult a competent electrician.
The Installation must be carried out by
a qualified
electrician.
LED Linear High Bay
Part No.
Power
Input
Current
Input
Voltage
PFFrequecy THD CCT
Ra
Life
Span
Warranty
Luminous
Flux
80W 0.734A
1.009A
1.513A
2.017A
2.063A
2.750A
0.524A
0.714A
0.951A
50/60Hz
AC120-277V
AC120-347V
AC347-480V
>0.9
<20%
110W
14300lm
21450lm
28600lm
10400lm
29250lm
39000lm
29250lm
21450lm
39000lm
80 50,000h 5 years
4000K
5000K
5700K
225W
165W
300W
225W
165W
300W
Note:
1.The installation and maintenance must be completed by electricians or professionals.
2.Please cut off the power before installation and maintenance.
3.The thermally insulating material is not allowed to cover the fixture.
4.Please keep away from the corrosive substance, and keep the fixture dry and clean.
5.Working temperature: -4°F~122°F, storage temperature: -22°F~140°F.
Chain Installation
1.Hook the chain as below pic.
Chain
2. Insert the hook into the slotted holes,
as shown below.
3.Hook up the chain on the ceiling anchor.
5.Insert the terminal cap and wires into
the driver box.
6.Insert the wire terminal joint to the wire entry.
Installation completed.
4.Turn off power,and make wiring connections
with terminal cap(see wiring instrucion below).
Terminal cap
AC-L(BLACK)
AC-N(WHITE)
GREEN(GRD)
FIXTRUE
PURPEL(DIM+)
GREY(DIM-)
DIMMING
TO
SOURCE
120-277V
120-347V
347-480V
TS-FHB1-80W
TS-FHB1-110W
TS-FHB2-165W
TS-FHB2-165W
TS-FHB5-225W
TS-FHB5-225W
TS-FHB5-300W
TS-FHB5-300W
TS-FHB3-220W
220W