Instructions / Assembly

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 20 minutes.
1. Turn clockwise to fix the lifting Loop (K) to the Lamp Body (J)
2. Insert the bulbs (M) into the Sockets. Be sure to use light bulb(M) with wattage no greater than
specified on this fixture. Always make sure that electrical current is turned off before changing bulbs.
3. Carefully place the Lamp Body (J) into the Lamp Shade (L) and turn the Nut (G) clockwise to secure it
4. Screw the Chain(E) to the Hanging Loop(C) and the loop of the Loop with Closable Link(F)
5. Insert wires through the Chain(E), Hanging Loop(C),Canopy(B) and Mounting Plate(A).
6. Separate the Mounting Plate(A) from the Canopy (B) by unscrewing the Canopy Nut(D)anti-clockwise.
7. Fix the Mounting Plate(A) to the junction box with Mounting Screw (H).
Connect, Hot, Black or Red Outlet Supply Wire to:
Connect, Neutral, White Outlet Supply Wire to:
Black
White
* Parallel Cord (round & smooth) * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored
stripes)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions:
a) For installation in the United States: Wrap ground wire from outlet box around green
ground screw on mounting bracket, no less than 2" from wire end. Tighten ground screw. If
fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector.
b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire
around green grounding screw on mounting bracket. Tighten ground screw.
8. Attach the Canopy(B) to the junction box and fix it by turning the Canopy Nut (D) clockwise.
PLEASUE USE TYPE"B" BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT
THERE ARE 3 X 4W LED BULBS IN THE BOX.
ENJOY YOUR LAMP
2/2