Instructions / Assembly

MODEL #LVG1102-4SET
JONATHAN Y: OUTDOOR LIVING ROOM SET
If there are any questions related to defects, missing parts, assembly issues
or replacements, please send a detailed email to [e-mail]
I - PART AND HARDWARE:
A
B
C
D
E
F
G
H
I
J
K
L
M
N
Right Leg
Left Leg
Back Frame-Bench
Seat Frame-Bench
Back Frame-Chair
Seat Frame- Chair
Leg-Table
Table Top
Bolt M6x30
Bolt M6x15
Washer
Plastic Feet
Cushion- Chair
Cushion- Bench
Allen Key 4
3
3
1
1
2
2
2
1
28
8
36
16
2
1
1
PIECE PICTURE
QTY
1. 50% Tighten before xings all screws, Allen wrench Is recommended instead of an electric drill. 2. Place the item on a at ground to adjust and make sure it remains stable. 3. Tighten up all screws with tools gradually. 4. If the screws are not
aligned with holes during assembly, please loosen all all the other screws to 50% and continue the assembly process. 5. If the item is not stable, please loosen all the screws, adjust it on a at ground and tighten up all screws again.
6. Note: If one or more screws are fully tightened during assembly, chances are the others will not be aligned with holes. In addition, all the holes are disigned to be relatively larger to provide more space for the adjustment of the screws.