JONATHAN Y Model# VAN1008 Product Dimensions: 19”Wx18”Dx33”H WARNING : WEIGHT CAPACITY: 29 LBS SHELF LOAD CAPACITY: 15 LBS Warning : Do not stand on Vanity. Warning : Do not over torque bolts.
WARNING Inspect item carefully before a�emp�ng to install if there is any damage or obvious defect, do not install item may not be returned once it has been installed. CARE AND MAINTENANCE Always use felt pads under all ar�cles to prevent discolora�on or so�ening of the lacquer. Plas�c and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Hardware A x 22 B x 22 C x 40 D x6 E x4 F x1 G x2 H x4 I x 32 J x8 K x2 L x5 HS26A x 2 BC67 SET-UP TIME : 60 MINUTES Ver.
I 13 C Don't over �ghten ± 2 - 3 mm 14 C C 7 x8 I C x4 Don't over �ghten ± 2 - 3 mm Don't over �ghten ± 2 - 3 mm A I E 2 A C C E 3 A Ver.
13 14 7 B 2 B x5 3 B B Ver.
K D 1 D x4 K x1 A 1 A Ver.
9 9 Unplug the dowel 8 8 9 8 C 9 8 x2 x2 C I C L x 16 I 10 x x24 x8 L 10 11 11 Ver.
9 9 8 C C Ver.
B 1 B x8 K H H Ver.
6 B A 6 3 x4 B A I I Ver.
BC67 NOTE : Tighten all the screw BC67 x2 J J Ver.
Note : Hammer,fischer and screw not include ATTACHMENT OF FURNITURE This furniture may represent a danger for your security if it’s attachment on the wall has been done in an incorrect way. This attachment must be done by a person with great expertise who will make sure adequacy between the device of fixing and the wall. Please source the right fitting according to the wall type. For your safety, it is imperative to fix your furniture to the wall 5 C 5 4 D K C Ver.
Apply a thin bead of silicone compound around the vanity base and set the vanity top carefully in place. Remove any excess silicone compound with a wet rag Sold Separately Silicone not included Waterpass Ver.
I HS26A 12 I x 4 HS26A x2 I F 12 F Ver.
Ver.
