Installation Sheet

INSTRUCTION
TWO HANDLE TUB/SHOWER FAUCET
Tools:
Maintenance
Require:
Adjustable wrench
Groove joint plier
Pipe wrench
Phillips screwdriver
Pipe tape
Your new bathroom faucet is designed for years
of trouble-free performance.
Keep it looking new by cleaning it periodically
with a soft cloth. Avoid abrasive cleaners, steel
wool and harsh chemicals as these will dull the
finish and void your warranty.
Shut off main water supply. Install brass
waterway to in wall studs. Install rigid casting
to 1/2” water lines. Tailpieces on casting are
threaded for 1/2” threaded pipe and will accept
1/2” sweat copper.
For tub installation only, plug top outlet For
shower installation only,plug bottom outlet.
For tub and shower combincd installation,conncet
bottom outlet to spout.Use new piece of 1/2”
threaded pipe and proper fittings. Connect top outlet
to shower arm with proper fittings.
Turn on water.Slip on handles loosely.Check for
leaks.Flush both hot and cold lines for one minute
each.
Caution:Do not turn water off and on repeatedly
during initial period.
Thread escutcheon rings on to valves and back against finished wall.Install the handle assembly.
Helpful:
supply lines
basin wrench
hacksaw
tube cutter
utility knife
1
2
3
4
5
Preparation / Assembly / Testing