Installation Sheet

INSTRUCTION

THREE HANDLE TUB&SHOWER FAUCET

Tools:

Maintenance

Require:

Adjustable wrench

Groove joint plier

Pipe wrench

Pipe tape

Phillips screwdriver

Your new bathroom faucet is designed foryears of trouble-free

performance.

Keep it looking new by cleaning it periodically with a soft cloth.

Avoid abrasive cleaners, steel wool and harsh chemicals as

these will dull the finish and void your warranty.

Shut off main water supply. Install brass waterway

to in wall studs Install rigid casting to 1/2” water lines.

Tailpieces on casting are threaded for 1/2” threaded

pipe and will accept1/2” sweat copper.

For tub and shower combincd install ation, conncet

bottom outlet to spout. Use new piece of 1/2”threaded

pipe and proper fittings. Connect top outlet to shower

arm with proper fittings.

Turn on water. Slip on handles loosely. Check for

leaks. Flush both hot and cold lines for one

minute each.

Caution: Do not turn water off and on repeatedly

during initial period.

Thread escutcheon rings on to valves and back against finished wall. Install the handle assembly.

Helpful:

Supply lines

Basin wrench

Hacksaw

Tube cutter

Utility knife

Preparation/Assembly/Testing

PAGE 1
Preparation/Assembly/Testing INSTRUCTION THREE HANDLE TUB&SHOWER FAUCET Tools: Require: Adjustable wrench Groove joint plier Pipe wrench Pipe tape Phillips screwdriver 1 Shut off main water supply. Install brass waterway to in wall studs Install rigid casting to 1/2” water lines. Tailpieces on casting are threaded for 1/2” threaded pipe and will accept1/2” sweat copper. 2 For tub and shower combincd install ation, conncet bottom outlet to spout. Use new piece of 1/2”threaded pipe and proper fittings.