Installation Guide

from Jones Stephens Corp.

PlumBest

Quality Products for the Plumbing Professional x

3249 Moody Parkway • Moody, Alabama • 205•640•7200 • Toll Free 1•800•35•JONES

Fax (205) 640-7070 • Toll Free Fax 1•800•462•6991

www.plumbest.com

PVC BALL VALVES

specification submittal sheet

PART NO.B91-300

• Standard port

• For cold water lines

• Large flow opening

• One piece body construction

• EPDM seats and o-rings

• Working pressure 150 psi at 73ºF

• Quarter turn operation

• Not for compressed air

• Ideal for swimming pools,

irrigation and water supply uses

• Solvent ends comply with ASTM D 2466

• Threaded ends comply with ANSI B2.1

•SEE THE JONES STEPHENS CATALOG FOR MORE

INFORMATION ON THIS AND OTHER ITEMS.

SPECIFICATION SUBMITTAL SHEET

updated 04/30/03

PART NO. DESCRIPTION A B C

q B91-300 PVC Ball Valves 7-3/4” 7-1/4” 8 -1/4”

JONES STEPHENS CORPORATION

THREADED ENDS

3” IPS

PAGE 1
SPECIFICATION SUBMITTAL SHEET J O N E S S T E P H E N S C O R P O R A T I O N PVC BALL VALVES A specification submittal sheet PART NO.B91-300 B C • Standard port • For cold water lines • Large flow opening • One piece body construction • EPDM seats and o-rings • Working pressure 150 psi at 73ºF • Quarter turn operation • Not for compressed air • Ideal for swimming pools, irrigation and water supply uses • Solvent ends comply with ASTM D 2466 • Threaded ends comply with ANSI B2.