Owner Manual

DHCJW – Rev. B – 23 October 2019
800-543-4149
507-342-5169
www.jonti-craft.com Page 2 of 4
JonTi-Craft, Inc.
171 Hwy 68
P.O. Box 30
Wabasso, MN 56293
Assembly Instructions:
1. Place Hook Rail-G on flat surface and install 5-XCLX Coat Hooks with 10-XBTX Screws using
Phillips Screwdriver. Note location of rounded edge in respect to hook placement. Set aside for
installation later.
2. Install Top-C, Bottom-A, and Shelf-B to LH Side-D by aligning dowels. Ensure back grooves all
align and rounded edge of shelf is down. Secure with 6-XAUR Decorative Screws with 4mm Hex
Wrench provided.
3. Install RH-Side-E by aligning dowels. Ensure back groove is up and aligns with other grooves.
Loosely install with 6-XAUR Decorative Screws with 4mm Hex Wrench provided.