User Manual

15
3.7.6 SD Card
The SD Card section indicates whether you have an SD card in the
camera and whether it is enabled.
 To use the SD card, place it into the slot on the back of the
camera.
 If the camera does not recognize the SD card, remove the card
and unplug the camera. Put in the SD card and then plug in the
camera. The camera will reboot, and then it should be
recognized.
Note: It is always recommended that you format the card after
installation.
3.7.7 Storage Device
Using the Storage Device option, you can introduce another
element of the Storage Device , the Cloud Box. The Cloud Box is an
ideal DIY (Do It Yourself ) security solution for homes and small
businesses that require the recording of many hours of continuous
video.
To use a Cloud Box, you must first connect the Cloud Box to the
same network where one or more cameras are connected. Once
you have confirmed that the Cloud Box is connected, you need to
enter the Cloud Box ID and password and enable its use in the
Storage Device tab.