User Manual

3.7.8 Motion and Notification

The cameras can detect motion in the viewing areas and can as a

result of that detection, take a snapshot, record a video, trigger an

alert, etc.

The Motion and Notification tab offers two options to configure

what the camera should do if and when motion is detected in the

covered area:

 Motion Detection

 I/O Alarm

Select the Motion Detection tab to determine how sensitive the

camera is when it comes to sensing motion. You can change the

sensitivity settings for day and night operation separately to

improve motion detection.

Note: It is recommended that you start with the default settings and then alter them as needed to

adjust to the conditions in the viewing area.

The I/O Alarm is for external devices connected to the camera. This

setting is not commonly used. When finished, click Apply to save

your changes, and then Click Turn alert on. Toggle the Turn alert off

button to Turn alert off.