User Manual

3.7.11 Date/Time

In the Date/Time tab, you can set the date and time for your

camera. Choose the date, time, and the time zone. You can also

choose to synchronize to the local date and time automatically.

However, you can change the time manually if you prefer. You will

want to have the correct date and time so you can schedule your

recordings correctly.

3.7.12 System Settings

Under System, there are three sections under System, as detailed

below:

 Online upgrade

Online upgrade displays the current version number and shows if

there is a newer version. You will see a red dot next to the Setting

icon identifying that there is a new upgrade available. To download

and install the latest software version, click Update.

 Restore to factory settings

If you click Restore, it will restore the camera to the factory

defaults, which can Restore to factory settings be helpful in case

you have made changes to the camera and want to cancel these

changes.

 Restart device

Clicking Restart reboots the camera. It is the same as unplugging

the camera and plugging it back in again but is accomplished remotely.

Note: When the camera goes office, such as when using the Restart button, the snapshots are

deleted if you do not have an storage.