Installation Manual

⑩
LAN access
*The equipment supports access of LAN IP address; Steps for that are presented as
follows:
1.
Connect the DVR and the computer to the same LAN.
2.
Open the browser and press Enter after typing the IP address of the DVR in the
browser;
3.
If a plug-in is prompted to download, please log in again after installing the plug-in.
It will be directly accessed to the login interface, if there is no prompt.
4.
The user name and password are the same as that of the DVR; The default user
name is admin with a password;
5.
The successful login is as shown in the figure below.