User Manual

Channel Setup: change encode mode, camera resolution, motion
detection ect.
System Admin: system version, set password, edit users, simple
restore ect.
Video Playback: playback recorded videos.
Video Backup: backup recorded videos.
Color Adjust: adjust the brightness, contrast, sharpness ect. Of the
picture in each channel.
PTZ Control: enter PTZ control to control camera. (requires
camera to support this function.)
Volume: adjust volume of audio cameras.(works only for audio
cameras.)
Fast Network: configure the network.
Wireless Add: add devices by matching code.
Exit System: Logout, reboot, close screen output and shut down
the system.
WIFI range is like an apple and the antenna of NVR is in the center of it.
WIFI signal is strong all around the WIFI range. Antenna of NVR should be
put straight up, if not, WIFI signal will be weak. According to the signal trans-
mission character of antenna, the antenna of cameras should overlap or
parallel to NVR WIFI range, as pictures showed below.
Position the Antenna Correctly
Because of the character of WIFI, the WIFI signal will weaker when going
through the wall, stairs and other obstacles. We can use some methods to
be applied to bypass obstacles and extend WIFI range.
7
Extend WiFi Range
11
[e-mail]