Troubleshooting Guide

connect it.
II. Open the browser and it will automatically transfer to the menu page or you can
enter "192.168.10.1" to login menu.
set password：admin
II. Use the default IP : 192.168.10.1 and enter the next step. Scan wifi and choose
your own router wifi name. Then enter your router wifi password, next steps-set a
independent password for this extended wifi.
III. Save datas and wait the configuration process. After that, wait 30s and then
re-connect wifi "EW74" to surf the internet freely.
2. Internet speed is slow or 5g signal cannot be found:
I. Recommended set way：In a good wifi signal environment, extend "router's 5G
band" and connect "AP‘s 2.4G band" with your devices which will maximize the
extender's performance. Since 2.4G band has a better performance on through the
obstacles and walls.
II. Change the country code to the United States. Do not choose automatic channel,
choose 36 channels. Also, choose 40MHz for bandwidth 2.4G and 80MHz for 5.8G.
The higher the bandwidth, the weaker the long-distance signal. If the Internet is slow,
increase the bandwidth. And decrease the bandwidth if the signal is weak. Higher
bandwidth for high speed and short distance, low bandwidth for stable signal and
long distance. You can set the bandwidth according to your needs.
III. Besides, the fewer times the network passes wireless transmission, the less its
rate loss. Wired method is the best way to reduce loss. So we recommend that you
set "ap mode" which the signal is transfered only once via wireless way. If you set up
wireless transmission mode like “repeater mode”/ “bridge mode”. The signal
strength will decrease much in wireless transmission since its the signal is transfered
twice via wireless way.