User Guide

ManualsBrandsJOOWIN ManualsComputers & AccessoriesWiFi Extender 1200Mbps Internet Booster WiFi Range Extender up to 3000 sq.ft,Dual Band 2.4 & 5GHz Singal Booster, Long Range Amplifier with 4 Antenna, Alexa Compatible

1. When you get the product, please turn on the power switch and connect the

power.

2. After connected power, the reset button(the biggest LED circle) and the middle

light will turn on solid blue as below:(See the Picture 1)

(Picture 1)

3. About 30s-60s, all lights will turn into solid blue, then please go to the wifi list of

your device, find the JOOWIN_XXX_2G or JOOWIN_XXX_5G and connect it. (See the

Picture 2)

(Picture 2)

Summary of content (5 pages)

PAGE 1
. When you get the product, please turn on the power switch and connect the power. 2. After connected power, the reset button(the biggest LED circle) and the middle light will turn on solid blue as below:(See the Picture 1) (Picture 1) 3. About 30s-60s, all lights will turn into solid blue, then please go to the wifi list of your device, find the JOOWIN_XXX_2G or JOOWIN_XXX_5G and connect it.
PAGE 2
4. After you connected the JOOWIN wifi, the settings page will pop up,if not pop up,please open the browser and type the IP address 192.168.10.1, enter the password: admin and click SET PASSWORD.
PAGE 3
5. After you log into it, it will take about 15s-30s to scan the wifi available around you, then you can see the wifi list after scanning:(See the Picture 4) (Picture 4) 6. Please choose your wifi that you want to extend and enter the password on Pre-Shared Key. The password should be same as your router’s. (Please confirm that your router’s password have not the special character and suggest you to paste the password on it.
PAGE 4
7. Then please click Save Setting. It will begin to set up the extended wifi, please wait for 30s. (See the Picture 5) (Picture 5) 8. While you see the Configuration is in effect, please reconnect network. It means set up successfully, then please go to your wifi list and choose the new extended wifi to connect.(See the Picture 6) (Picture 6) 9. The new extended wifi will be your wifi name+2G or 5G. For example, if your wifi name is Russ, the extended wifi name will be Russ-2G, Russ-5G.
PAGE 5
10. How do I know that the repeater set up is successfully? please go back 192.168.10.1 and login to the setting page and check if you have set up the repeater successfully.(See the Picture 7) Picture 7 PS: Here is the function explaining about “combine wifi” and “Sync your device” Combine wifi: This function can automatically choose the fast channel for you, if you turn on this function, the extended wifi name will be your wifi name-2G&5G.