User's Manual

Doc No: WG6611-00-DTS-D08
Copyright © JORJIN TECHNOLOGIES INC. 2017
http://WWW.JORJIN.COM.TW
CONFIDENTIAL
Page 19
Note: (1) Reflow soldering is recommended two times maximum.
(1) Add Nitrogen while Reflow process： SMT solder ability will be better.
 Stencil thickness： 0.1~ 0.15 mm (Recommended)
 Soldering paste (without Pb)： Recommended SENJU N705-GRN3360-K2-V can get better
soldering effects.