User's Manual

DOC No: ZB7412-00A-DTS-R03

____________________________________________________________________________________

http://WWW.JORJIN.COM.TW

5. DESIGN RECOMMENDATIONS

5.1. Module Layout Recommendations

Follow these module layout recommendations:

 Antenna

For a module with on board chip antenna, to eliminate the influence from other

components or ground, recommended that the module is placed in the corner of main PCB,

and define a clearance area around the antenna, where no grounding or signal trace are

contained. The clearance area applies to all layers of the main PCB. The recommended

dimensions of the main PCB keep out area are shown in bellow.

11 mm

5.5 mm