User's Manual

DOC No: ZB7412-00A-DTS-R03
____________________________________________________________________________________
Copyright © JORJIN TECHNOLOGIES INC. 2017 40
http://WWW.JORJIN.COM.TW
No.
Item
Temperature (°C)
Time (sec)
1
Pre-heat
D1: 140 ~ D2: 200
T1: 80 ~ 120
2
Soldering
D2: = 220
T2: 60 +/- 10
3
Peak-Temp.
D3: 250 °C max
Note: (1) Reflow soldering is recommended two times maximum.
(2) Add Nitrogen while Reflow process： SMT solder ability will be better.
 Stencil thickness： 0.1~ 0.13 mm (Recommended)
 Soldering paste (without Pb)： Recommended SENJU N705-GRN3360-K2-V can get better
soldering effects.