User's Manual

DOC No: ZB7412-00A-DTS-R03

____________________________________________________________________________________

http://WWW.JORJIN.COM.TW

Manual Information to the End User

The OEM integrator has to be aware not to provide information to the end user regarding how to

install or remove this RF module in the user’s manual of the end product which integrates this

module.

The end user manual shall include all required regulatory information/warning as shown in this

manual.

9.3. Europe

Hereby, Jorjin Technologies Inc. declares that the radio equipment type RF module is in compliance

with Directive 2014/53/EU

The full text of the EU declaration of conformity is available at the following internet address:

http://www.jorjin.com/upload/14XXXXXXXX.pdf

The compliance has been verified in the operating frequency band of 2400 MHz to 2483.5 MHz.

Developers and integrators that incorporate the ZB7412-00 RF Module in any end products are

responsible for obtaining applicable regulatory approvals for such end product.

The ZB7412-00 has been tested in the 2400-GHz to 2483.5-GHz ISM frequency band at 3.3 V with a

maximum peak power of 7.1 dBm EIRP across the temperature range –40°C to +85°C and tolerance.

Labeling and User Information Requirements

As a result of the conformity assessment procedure described in Annex III of the Directive

2014/53/EC, the end-customer equipment should be labeled as follows:

9.4. Japan

The ZB7412-00 is certified as a module with type certification number XXX-XXXXXX. End products

that integrate this module do not need additional MIC Japan certification for the end product.