Installation & Assembly

Installation Instructions for
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing compliantNEC
junction boxes.
This product is safety listed for damp locations.
1
2
1A
3
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Screw the threaded pipe to the bottom of the fixture.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Place the shade, shade ring, diffuser, and washer (in that order) onto the threaded pipe and secure it in place with the hex
nut (Do not over tighten).
Place the cup onto the threaded pipe and secure it in place by screwing the finial onto the threaded pipe.
1
4
5
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
1
THREADED PIPE
FINIAL
SHADE
CUP
5
4
WASHER
2
LAMP
HEX NUT
SHADE RING
DIFFUSER
3 Light Semi-Flush Mount