Installation Manual Part 1

TR-8000 Operator and Installation Manual 8
3 Introduction
3.1 Safety Instructions
This equipment should be installed according to the instructions found in the installation part of
this manual.
The equipment should not be mounted in a way that exposes it for excessive heat from the sun
or other sources.
The equipment should not be mounted in a flammable environment.
The equipment should not be mounted in a way that exposes it to direct rain or water.
CAUTION!
This equipment contains CMOS integrated circuits. Observe handling precautions to avoid static
discharges which may damage these devices.
Do not open equipment. Only qualified personell should service the equipment.
3.2 Compass Safe Distance
Transponder unit:
Standard Compass: 95cm
Steering compass: 65cm
Display unit:
Standard Compass: 30cm
Steering compass : 14cm
3.3 Copyright Notice
This manual, as well as the software described in it, is furnished under license and may be used or
copied only in accordance with the terms of such license. The content of this manual is furnished for
informational use only, is subject to change without notice, and should not be constructed as a
commitment by Jotron AS. Except as permitted by such license, no part of this publication may be
reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, recording, or otherwise, without the prior written permission by Jotron AS.
Please remember that existing artwork or images that you want to include in your project may be
protected under copyright law. The unauthorized incorporation of such material into your new work
could be a violation of the rights of the copyright owner. Please be sure to obtain any permission
required from the copyright owner.
3.4 Disclaimer Notice
The information in this book has been carefully checked and is believed to be accurate.
However, no responsibility is assumed for inaccuracies.
Jotron AS reserves the right to make changes without further notice to any products or modules
described herein to improve reliability, function or design.
Jotron AS does not assume any liability arising out of the application or use of the described product