Installation Manual Part 2
Table Of Contents
- 8 Installation
- 8.1 Mechanical Mounting
- 8.2 Cabling
- 8.3 Wiring and Connections
- 8.3.1 Transponder
- 8.3.1.1 Pictorial display of typical connections to the transponder
- 8.3.1.2 Label in transponder with connection tables
- 8.3.1.3 Power connection
- 8.3.1.4 Sensor connections
- 8.3.1.5 External display – ECDIS/Radar connections
- 8.3.1.6 Pilot / Aux. Display connection
- 8.3.1.7 Alarm Connection
- 8.3.1.8 Detailed description of connections, fuses, factory reset etc.
- 8.3.2 Display Unit:
- 8.3.1 Transponder
- 9 Initial configuration
- 10 Operation Instructions
TR-8000 Operator and Installation Manual 65
10 Operation Instructions
10.1 Configuration Menu
The AIS configuration menu consists of six menus, containing the settings and configurations most
applicable to the user. Some settings are write-protected by administrator password, but the user is
always allowed to view the current settings.
10.1.1 Own Ship
The own ship configuration is for setting the static data of the ship and is primarily only used during
setup/installation but should also be checked regularly (at least once a month).
See available settings on the display
shown here
To be able to change values, the
Admin pswrd button must be
pressed and the password must be
entered (Default: SE)
Vessel name, Call sign, MMSI and
IMO are all text or numbers and may
entered easily