Installation Manual Part 2
Table Of Contents
- 8 Installation
- 8.1 Mechanical Mounting
- 8.2 Cabling
- 8.3 Wiring and Connections
- 8.3.1 Transponder
- 8.3.1.1 Pictorial display of typical connections to the transponder
- 8.3.1.2 Label in transponder with connection tables
- 8.3.1.3 Power connection
- 8.3.1.4 Sensor connections
- 8.3.1.5 External display – ECDIS/Radar connections
- 8.3.1.6 Pilot / Aux. Display connection
- 8.3.1.7 Alarm Connection
- 8.3.1.8 Detailed description of connections, fuses, factory reset etc.
- 8.3.2 Display Unit:
- 8.3.1 Transponder
- 9 Initial configuration
- 10 Operation Instructions
TR-8000 Operator and Installation Manual 68
10.1.2 Display Settings
Red square shows
button selected to get to next menu
10.1.2.1 Sleeping Targets
The first “Display settings” menu
configures “Sleeping targets” based
on:
Range
Class B
The “sleeping targets” may not be
shown
“Views” may be configured by
pressing this button on the “Button
Bar”
10.1.2.2 Views
Here we can configure which
columns shall be shown in “Ships
List” (chapter 7.2.6) and if we want
“Head up” or “North up” in
“Graphical view”(chapter 7.2.7).