Installation Manual Part 3

TR-8000 Operator and Installation Manual 89
10.2.1.6 Port Monitor
Red square shows
button selected to get to next menu
“Port monitor” is an important feature in TR-8000 Display Unit which can help troubleshooting
connection issues with different sensors. The “Port monitor” acts as a Terminal window, showing raw
data received on a sensor, similar to Windows “Hyperterminal”
First select which “Sensor port” you want to
“listen” to
And if a Sensor is connected it could look similar to
these:
The two screenshots above shows Sensor
data which are most probably OK, while left
screenshot shows corrupt data from incorrectly
connected sensor (Polarity of signals are
incorrect)