Installation Manual Part 3

TR-8000 Operator and Installation Manual 96
10.2.6 Self Test
Red square shows
button selected to get to next menu
The “Self Test” consist of two different tests, a “Transponder self test” and a “Display self test”:
“Transponder self test” measures values of:
Signal strength (RSSI.. 0-255)
RF Power (Forward+ Reflected :0-512)
Antenna matching (VSWR)
Voltages ( 3, 5, 8 and 14v)
Receivers status
Transmitter status
Power source (Main, Backup)
When “Display test” is selected, this window is
shown with measurement:
Voltages
Supply source (Power source)
Light sensor reading (If automatic
display adjustment are activated [option])