User's Manual

14 84145_UM_ SART20_ B
4 INSTALLATION
Tron SART20 can be mounted several ways, depending on the options available.
As a general rule, the transponder should be mounted as high as possible to increase line of sight to the
search and rescue units.
Metal objects close to the transponder should be avoided, these will limit the performance in the directions
they are located.
4.1
BRACKETS
There are three different mounting brackets available.
1.
Wall bracket.
2.
Lifeboat bracket.
3.
Pole bracket.
4.1.1
Wall bracket
A wall bracket is delivered with the Tron SART20 and should be used for storage of the transponder.
The bracket should preferably be mounted in a vertical position and in a place where the Tron SART20
is easily available in case of an emergency.
Figure 4.1.1a, wall bracket. Figure 4.1.1b, Tron SART20 mounted in wall bracket.
The bracket should be mounted with four screws (Ø 4 mm.