User's Manual

10W Car Wireless Charging
Roller Car Phone Holder
User Manual
1. Pre Setting: Press the top button to release the arms,
put your phone in the middle of the holder and push the
left and right arms concurrently to clamp your phone firmly.
Arm clamp
Silicone roller
(1) Fits for Qi standard mobile phones;
(2) Support 10W charging , as well as 10W / 7.5W /5W
wireless charging;
(3) Push the reset button , and place phone in jaws slantly
then push the clamps to hold the phone securely;
(4) The arm clamp can be flexibly extended, so it is easy to
hold different mobile phones;
(5) This wireless charger comes with over-current protection,
overheat protection, short circuit protection;
2.To mount your phone to the wireless
charging center, insert one side of
phone and then push other side in.
3.Reset the clamp. Press the button on
the top of the holder to release the
arm clamp , then follow the step 1
to adjust the arm size with your phone.
Material:ABS + PC
Input power:5V2A, 9V/2A
Output power:10W (Max)
Effective Distance of Wireless Charging:3-6mm
Conversion efficiency: standard charging ≥70%, fast charging ≥75%
Working frequency:115-205KHz