Jowua Multi-Device Wireless Controller 包裝設計
JOWUA MULTI-DEVICE WIRELESS CONTROLLER Jowua Multi-device Wireless Controller User Manual Jowua 多連結無線控制器 說明書
JOWUA MULTI-DEVICE WIRELESS CONTROLLER 功能鍵 1.
JOWUA MULTI-DEVICE WIRELESS CONTROLLER 2. MULTI-CONNECTION MODE SETTING 2. 多連結模式設定 Jowua controller supports many game platforms. Please move the multi-device switch to select the corresponding connection mode. Jowua 搖桿支援多遊戲平台,請透過多連結控制器選擇相對應的連結模式; X X X : Bluetooth X : 藍芽 S : Switch S : Switch X : Power off / Wired Connection X : 關機 / 數據線連接 Wired Step 1: Move the [Multi-device switch] to select the connection mode. Step 2: Press the [Home] button to activate the controller.
JOWUA MULTI-DEVICE WIRELESS CONTROLLER 如何配對 HOW TO PAIR X : Bluetooth 1. Switch the [Multi-device switch] to X mode. 2. Press and hold the [Sync] button 3 seconds untill you see the 2nd LED light flashes quickly to start pairing. 3. Go to Bluetooth setting on your device and search for new device, choose “Xbox Wireless Controller” and connect. 4. LED light will stop flashing and remain lit once the connection is successful . 1 2 3 4 X : 藍芽 1. 2. 3. 4.
JOWUA MULTI-DEVICE WIRELESS CONTROLLER S : Switch S : Switch 1. From the HOME Menu, select Controllers, then Change Grip and Order. 2. Go to controller setting on Switch (as photo), switch the [Multi-device switch] to S mode. 3. Press and hold the [Sync] button 3 seconds untill you see the 3rd LED light flashes quickly. 4. Pairing is completed once Switch shows successful connection to new controller. LED light will also stop flashing and remain lit.
JOWUA MULTI-DEVICE WIRELESS CONTROLLER 2. POWER OFF 2. 關機 Switch the “Multi-device switch” to power off mode. Ensures the controller is shutdown, and will not awake or power-on by pressing any button. 移動 [多連結控制器] 至 鍵導致搖桿喚醒。 *Note: When the USB cable is plugged-in, the controller still can be connected and *注意: 即使在關機狀態下,連接數據線仍可正常連結並且充電。 關機模式。確保控制器完全斷電,防止誤觸其他按 charged even on the power-off mode. 3. AUTO SLEEP MODE 3.
JOWUA MULTI-DEVICE WIRELESS CONTROLLER 4. POWER AND BATTERY 4. POWER AND BATTERY Battery level indicator: 電量指示: Press [Turbo] T and [Directional pad Left / Right] to check current battery level. The LED will flash 3 seconds and switch back to the connection mode indicator. 同時按下 [Turbo] T 與 [十字方向鍵 左 / 右] 指示燈快閃三秒鐘後自動切換回當前模式指示燈。 Low power alert: when all four LED flash means the controller battery is under 10%. Please plug in the USB-C port to start charging.
JOWUA MULTI-DEVICE WIRELESS CONTROLLER 5. AUTO BURST & TURBO 5. 自動連發 & TURBO Burst mode setting: 連發模式設定: • Manual Burst • 手動連發 Press [Turbo] T (1st time) + [A / B / X / Y / L / ZL / R / ZR] to activate. 按下 [Turbo] • 自動連發 • AUTO Burst Press [Turbo] T (2nd time) + [A / B / X / Y / L / ZL / R / ZR] to activate. 按下 [Turbo] • 取消連發 • Cancel Burst Press [Turbo] T (3rd time) + [A / B / X / Y / L / ZL / R / ZR] to cancel burst.
JOWUA MULTI-DEVICE WIRELESS CONTROLLER 6. VIBRATION LEVEL ADJUSTMENT 6. 震動馬達設定 The controller supports 5 levels of vibration strength; 100%, 75%, 50%, 30% and Off. Five-gear vibration adjustment as below; 馬達支援5種強弱檔位:100%, 75%, 50%, 30% 以及關閉. 設定方法如下; • Increase motor: [Turbo] T + [Directional pad Up Arrow] • 增強震動效果: [Turbo] T + [十字方向鍵/上] • Decrease motor: [Turbo] T + [Directional pad Down Arrow] • 減輕震動效果: [Turbo] T + [十字方向鍵/下] 7. RESET 7.
JOWUA MULTI-DEVICE WIRELESS CONTROLLER Product Specification • • • • • Size: 154*111*59mm Weight: 185g±10g Material: New type eco-friendly ABS Connection: Bluetooth Power: o o o o o o Battery: Built-in 600mAh Lithium-ion battery Working voltage: DC 3.7-4.
JOWUA MULTI-DEVICE WIRELESS CONTROLLER FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.