User's Manual

JOWUA MULTI-DEVICE WIRELESS CONTROLLER
S
: Switch
1. From the HOME Menu, select Controllers, then Change Grip and Order.
2. Go to controller setting on Switch (as photo), switch the [Multi-device switch]
to S mode.
3. Press and hold the [Sync] button 3 seconds untill you see the 3rd LED light
flashes quickly.
4. Pairing is completed once Switch shows successful connection to new
controller. LED light will also stop flashing and remain lit.
＊ Note: Under any wireless pairing mode, the controller will be in auto sleep
after unsuccessful pairing for 2 minutes. Please press [Home] button to wake-
up the controller.
S
: USB
Wired Connection
1. Connect the controller and host device with the USB cable as a wired
controller while charging the battery.
2. When the USB cable is plugged-in, the controller will automatically disconnect
the wireless (Bluetooth) connection and set wired connection as default.
1 2 3 4
S
: Switch
1. 從HOME選單點選 控制器 ，再點選 更改拿法 / 順序 。
2. Switch 進入控制器設置頁面 (如圖示), 移動 [多連結控制器] 選擇 S 模式。
3. 長按 [配對] 按鈕３秒鐘直到下方第三個LED指示燈快速閃爍，進入配對模式。
4. 配對成功後介面顯示連結搖桿圖示，LED 指示燈將由快速閃爍轉為恆亮。
＊注意 : 任何無線配對模式下，搖桿於 2 分鐘內沒有配對成功則自動休眠，請按 [Home] 鍵再次
喚醒搖桿。
: USB 數據線連接
1. USB數據線連接控制器與主機，則可作為有線搖桿使用，並同時給鋰電池充電。
2. 如果正在使用藍牙連接主機，插入USB數據線後則會先自動斷開藍芽，並默認有
線模式。
1 2 3 4