Instructions

ManualsBrandsJoy-it ManualsDevelopment ToolsArduino board Pro

ARD_MEGA2560PRO

Arduino Mega 2560 compatible microcontroller, not an original Arduino

1. GENERAL INFORMATION

Dear customer,

thank you for choosing a Joy-IT product. Our board is a high quality small

form factor replica and compatible to the Arduino Mega 2560 but it is not an

original Arduino. The „MegaPRO Board“ is the right microcontroller board

for those who need many pins in a small form factor.

The ATMega2560 microcontroller oers you enough performance for your

ideas and projects. It is 101.52 x 53.3 mm in size and has more connections

than others with 54 digital in- / outputs and 16 analog inputs.

Summary of content (4 pages)

PAGE 1
ARD_MEGA2560PRO Arduino Mega 2560 compatible microcontroller, not an original Arduino 1. GENERAL INFORMATION Dear customer, thank you for choosing a Joy-IT product. Our board is a high quality small form factor replica and compatible to the Arduino Mega 2560 but it is not an original Arduino. The „MegaPRO Board“ is the right microcontroller board for those who need many pins in a small form factor. The ATMega2560 microcontroller offers you enough performance for your ideas and projects. It is 101.52 x 53.
PAGE 2
. TECHNICAL SPECIFICATIONS Model ARD_MEGA2560PRO EAN 4250236812366 Microcontroller ATmega2560 Input voltage 6 - 9 V at VIN Digital IO 54 of which 15 PWM Analog IO 16 DC current IO 20 mA DC current 3.3 V 50 mA Storage 256 KB (8 KB for Bootloader) SRAM 8 KB EEPROM 4 KB Clock Speed 16 MHz Dimensions 55 x 38 mm 3.
PAGE 3
4. SOFTWARE-INSTALLATION If you start programming the Joy-IT ARD_Mega2560PRO, you have to install a development environment and the drivers for the associated operating system on your computer which is going to be used for programming. The recommended development environment is the “Arduino IDE“ which is released by the Arduino manufacturer as an open source software. This software is aimed at beginners, due to concept and structure.
PAGE 4
6.FURTHER INFORMATION Our information and redemption obligation according to the electro-law (ElektroG) 2 Symbol on electrial and electronic products : This crossed-out bin means that electrical and electronic products do not belong into the household waste. You must hand over your old appliance to a registration office. Before you can hand over the old appliance, you must remove used batteries and accumulators which are not enclosed by the device.