User manual

KY-032 Hindernis Detektor Modul
Ausgabe: 29.04.2016 Copyright by Joy-IT - Published under CC BY-NC-SA 3.0 Seite 154 von 227
Anschlussbelegung Raspberry Pi:
Enable = - [N.C. (Steckbrücke gesteckt)]
Signal = GPIO24 [Pin 18]
+V = 3,3V [Pin 1]
GND = Masse [Pin 6]
Beispielprogramm Download
KY-032_RPi_HindernisDetektor.zip
Zu starten mit dem Befehl:
sudo python KY-032_RPi_HindernisDetektor.py