Data Sheet
Page 1 of 2
Version 2.06
Release Date:2010.07.21
PenMount 9026BH Control Board Data Sheet
Page 1
Website: http://www.penmount.com
PenMount 9026BH Touch screen Control Board
RoHS compliance
PenMount 9026BH control board is a very small foot print touch screen control board, with the same
functions as PenMount 9084, PenMount 9026BH is different in the mechanical size and the board
height in order to fit different systems space.
PenMount 9026BH is also RS-232 interface touch screen control board. There are two wires on
board, the first is for the power and RS-232 interface,
power line is allowed to have 5V to 12V DC input, RS-232
interface cable has 9-pin D-sub connector. The second
cable is for 4-wire or 8-wire touch screen.
Electrical Specifications:
Touch Screen For 4- & 8- wire analog resistive type
Communications RS-232 interface
Baud Rate 19200 baud rate fixed, N81, PnP mode
Touch Screen Controller PenMount 9000 microcontroller
Resistance Range 50~1.3K Ω
Resolution 2048x2048
Diagnostic LED on board
Electrostatic Discharge
(ESD)
Air Discharge 15KV
Contact Discharge 8KV
Operating Voltage 5V to 12V DC
Operating Temperature 0 ~ 50 ℃℃
Size 60 (L) x 20 (W) x 8.3 (H) mm
Power Consumption
Standby Mode : 15 mA ; Active Mode : 26.5 mA
( VCC=+5V, Top sheet Panel Resistance: 365 ohm ; Bottom sheet Panel
Resistance: 660 ohm )
Note. Actual current will be different by touch panel’s resistance.
Driver Software
DOS, Windows 3.1/ NT4.0/ 95/ 98/ Me/ 2000/ XP/ 2003/ 2008/ Vista/ 7,
Linux (up to kernel 2.6), QNX 6.2/ 6.3/ 6.4/ 6.5,
Windows CE 4.2/ 5.0/ 6.0 (for X86, Armv4, Armv4i platform);
Solaris 10
E-mail: penmount@seed.net.tw