LABORATORY POWER SUPPLY JT-RD6012-C 1. GENERAL INFORMATION Dear customer, thank you very much for choosing our product. In the following, we will introduce you to what to observe while starting up and using this product. Should you encounter any unexpected problems during use, please do not hesitate to contact us. The RD6012-C is a laboratory power supply that can be used in various operating modes (e.g. constant current or constant voltage operation, etc.).
. TECHNICAL SPECIFICATIONS Display Input voltage range 2.
4. DEVICE OVERVIEW 4.1. Front Panel Rotary Encoder Direction buttons Keypad Screen Confirm button Output switch Power supply output positive terminal Battery charging positive terminal Power button Second function button Quick storage button Current /Overcurrent protection value setting Micro USB Interface Power supply output/ battery charging: negative terminal Voltage/ Overvoltage protection value setting 4.2.
.3. Case Back Panel Main on / off switch Temperature sensor socket Ventilation openings (do not cover) www.joy-it.net Pascalstr.
. MENU INTRODUCTION 1. Operation Menu Press 'SHIFT'+'0' to enter the system setting menu . In the menu operation, the icon in red or cursor is the currently selected menu; the icon in blue is the unselected menu; press ENTER to confirm; press the encoder to cancel or return; press the direction key to move the cursor or switch menu; rotate the encoder to change the setting; the settings will be automatically saved when returning from the menu page.
4. Data Group Quick Storage and Callout Press 'MEM' +keypad button 1-9, you can store the output voltage value, output current value, overvoltage protection value, overcurrent protection value into the corresponding data group (as shown above), then press 'ENTER' to confirm, or press the encoder to cancel. Press 'SHIFT' +keypad button 1-9 to quickly call out the saved data (as shown above). Press 'ENTER' to confirm, or press the encoder to cancel. 5. Keypad lock and unlock Press 'SHIFT'+'.
. Main Page Style setting You can press 'SHIFT' + '0' to enter the system setting menu and then press the right button to enter the main page style setting menu as shown above. Press ENTER and then use the direction button to set classic style or curve style. The pattern in red is the style be chosen. The classic style is the system default style and the large font shows the voltage, current and power.
6. PC-SOFTWARE To control the power supply from the app, you must first enable WiFi. To do so, press Shift and then 0 to enter the menu. Now press Enter and use the arrow keys to navigate to Interface. Now turn the knob to select WiFi and press the knob several times to confirm and go back. The changes will be applied after restart of the power supply. The power supply will automatically use the strongest WLAN network. Make sure that your computer is on the same network. Download the PC software here.
Once your IP address is displayed on your power supply, click Next. If an incorrect IP address is displayed on your power supply, navigate to Reset using the arrow keys and confirm with ENTER. The IP is now determined again. Your power supply unit now receives the necessary information to connect to your computer. This may take a few seconds. You can then connect your power supply unit to the PC software by clicking on Connect in the lower left corner. www.joy-it.net Pascalstr.
Batteriestatus Graphical representation Call up data groups Info Output ON/OFF Connect / Disconnect Selected output voltage Maximum Output voltage Selected output current Maximum Output current Data group selection Read data groups Write data groups Intervals Setting www.joy-it.net Pascalstr.
7. ANDROID APP To control the power supply from the app, you must first enable WiFi. To do so, press Shift and then 0 to enter the menu. Now press Enter and use the arrow keys to navigate to Interface. Now turn the knob to select WiFi and press the knob several times to go back. The power supply will automatically use the strongest WLAN network. You must now restart the power supply. Now install the App RdPower from Ruideng Technology from the Play Store.
Open the app and press the button in the upper left corner to enter the menu. Here you can see your IP address, you will need this later. Now go to Distribution Network and also restart the power supply. www.joy-it.net Pascalstr.
You should now see the following in your app: Once your IP address, which you could see in the app before, is displayed on the screen of your power supply, you can click NEXT. If an incorrect IP address is displayed on your power supply, use the arrow keys to navigate to Reset and confirm with ENTER. The IP is now determined again. Now you have to enter the password of your WLAN network and click Click CONFIRM. www.joy-it.net Pascalstr.
After a short wait, you can now connect your smartphone to your power supply by clicking on CONNECT. Now you can operate the power supply with your smartphone. Please note, however, that the power supply cannot be adjusted manually as long as your smartphone is connected.
8. IOS APP To control the power supply from the app, you must first enable WiFi. To do so, press Shift and then 0 to enter the menu. Now press Enter and use the arrow keys to navigate to Interface. Now turn the knob to select WiFi and press the knob several times to go back. You must now restart the power supply. Now install the App RdPower from Ruideng Technology from the App Store. You must give the app the permissions it requires to work. www.joy-it.net Pascalstr.
Open now the app and move to the area named Distribution network where you have to establish the connection with the device. Click now on Init to start with the configuration. Enter now your password of your network in case that the IP-address on your iPhone is identical with the IP-address of your device. Afterwards, click on Distribution to establish the connection. If an incorrect IP address is displayed on your power supply, use the arrow keys to navigate to Reset and confirm with ENTER.
After, you have successfully connected, you can access the home screen in the WiFi Connect area. There, you can activate the direct connection to the device and use the functions of the RD6006. Note, however, that the power supply can no longer be adjusted manually while your phone is connected.
9. ADDITIONAL INFORMATION PR Our information and take-back obligations according to the Electrical and Electronic Equipment Act (ElektroG) Symbol on electrical and electronic equipment: This crossed-out dustbin means that electrical and electronic appliances do not belong in the household waste. You must return the old appliances to a collection point. Before handing over waste batteries and accumulators that are not enclosed by waste equipment must be separated from it.