3 3 5inch HDMI LCD Ausgabe 14.12.
3 5inch HDMI LCD Contents 1. Introduction 2. Working with PC 3. Working with Raspberry Pi 3.1 Using our Raspbian-image 3.2 Using our drivers 4. Support Ausgabe 14.12.
5inch HDMI LCD 1. Introduction 5 inch Resistive Touch Screen LCD, HDMI interface, supports various systems 2. Working with PC This product supports Windows 10/8.1/8/7 operation systems. For the Windows 10/8.1/8 OS, the touch screen supports multi-touch up to 10 points. For some Window 7 OS, the touch screen supports single touch only. Turn on the "backlight" switch then connect the LCD to your PC (USB Port of LCD -> USB Port of PC; HDMI Port of LCD -> HDMI Port of PC.
3 5inch HDMI LCD 3. Working with Raspberry Pi When working with Raspberry Pi, you should set the resolution of the LCD by yourself, or else the LCD screen will not work. For more detail information, please read the following section. You can choose to use our preinstalled Raspbian image or to install the drivers on your own. Both ways are described below.
3.1 Using our drivers Download our driver here and copy the file on your system. Append the following lines to the config.txt file which is located in the boot Folder of your micro SD card: max_usb_current=1 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt 800 480 60 6 0 0 0 Make sure that there are no spaces on either side of the equal sign. Now, that you prepared the LCD-Screen, you have to install the drivers.
3 5inch HDMI LCD 4. Support If you have any questions , or problems please contact us via e-mail, phone or support system. E-Mail: service@joy-it.net Support-System: http://support.joy-it.net Phone: +49 (0)2845 98469 – 66 (11- 18 Uhr) Please visit our website for more information: www.joy-it.net Ausgabe 14.12.
