User manual

ManualsBrandsJOY-IT ManualsRaspberry PiSensor kit Arduino, Banana Pi, Cubieboard, Raspberry Pi®, Raspberry Pi® A, B, B+, pcDuino

KY-016 RGB 5mm LED module

Contents

1 Picture ................................................................................................................................................................. 1

2 Technical data / Short description ....................................................................................................................... 1

3 Pinout ................................................................................................................................................................... 2

4 Code example Arduino ......................................................................................................................................... 2

5 Code example Raspberry Pi ................................................................................................................................. 4

Picture

Technical data / Short description

LED-module which includes a red, blue and green LED. These are connected by a common cathode.

An additional resistor might be necessary for some voltages.

Vf [ ]= 1,8V

Red

Vf [ , ]= 2,8VGreen Blue

If= 20mA

Vorwiderstände:

Export: 16.06.2017 Copyright by Joy-IT - Published under CC BY-NC-SA 3.0 Page 65 of 214