Data Sheet
Published: 23.03.2018
Technical Specifications
Model Teensy Octo28
EAN 4250236810607
Teensy Octo28
SD Card Adaptor
This adapter card connects the Teensy 3.1 with thousands of WS2811/WS2812 LED (also called NeoPixel)
using the OctoWS2811 library.
It contains a buer module 74HCT245 and 100 Ohm series matching resistors. The board is connected to
the LED strips via a CAT6 Ethernet cable. A CAT6 cable is characterized by a very high bandwidth, minimal
crosstalk between the wire pairs and an impedance of 100 ohms for very high quality signal transmission.
Teensy 3.1 is a small, breadboard compable development board designed by Paul Storegen and PJRC.
Teensy 3.1 is a cost-eecve 32-bit ARM Cortex-M4 plaorm for hobby developers, students and engine-
ers to use with a customized version of the Arduino IDE (Teensyduino) or for direct programming in C.