User's Guide

7
Listening to your iPhone, iPod, MP3 player etc. (AUX input)
You can listen to the sound of a connected external audio device such as an iPhone, iPod or
MP3 player through your speaker. Connect one end of the 3.5 mm jack cable supplied to the
AUX input socket located at the back of karaoke party speaker, and the other end to your audio
equipment (iPhone, iPod, MP3, PC, CD player, etc). The speaker will automatically change to
AUX input mode once the AUX IN cable has been inserted.
NOTE: Use the SKIP FORWARD/ BACKWARD controls of the connected audio device to
control the song playback.
Using the Microphone
You can sing along to any music playing from the karaoke speaker using the microphone
included. Adjust the microphone volume using the left dial and echo control as desired. If any
howling sound occurs, then stand further away from the speaker or reduce the music or
microphone volume until the howling stops. Be sure to switch the microphone on first using the
switch on the microphone.
NOTE: Do not tap or bang the microphone as this can cause damage to both the microphone
and speaker.
Troubleshooting Guide
If you encounter any issues while using the karaoke speaker then please check the following
before contacting the retailer or manufacturer for further help:
No power
• The power is not on; make sure the party speaker POWER/ VOLUME control is not turned
fully anti-clockwise.
• The karaoke speaker could be completely out of charge. Recharge the speaker using a USB
power supply and then try again.
No lightshow effect
• The Lightshow is probably just switched off. Press the LIGHTSHOW button to turn on the
lights.