Operation Manual

Assembly Instructions
STEP 1- Install the column on the underpan
A/ Connect the electronic wire inside the plate with the electronic wire inside the column. Put
the column on the underpan, then making sure the holes alignment.
B/ Attached the column on the plate, Using 4 M10*40 bolts, 4 Φ10 washers and 4 Φ10 spring
washers. Tighten it securely with wrench.
Plate
M10X40 Bolt
Φ10 Sprin
g
Washer
Φ10 Washer
Column
- 4 -