User's Manual

9
Use only the AC adaptors supplied with the package.
Before plug in AC adaptors, please make sure only rechargeable NiMH
batteries [or no battery] are inside the battery compartment.
Special Note for JY-229TC
Switch the Channel Selection switch at the bottom of the unit to any one of
the 4 channels to turn on the unit.
MOUNTING THE CAMERA
The Camera unit JY-229TC is designed for mounting on the ceiling, or on to
the wall, or simply placed on table.
To mount the Camera unit:
1. Take the Camera Mounting Plate off from the bottom of the
Camera unit.
2. Secure the Mounting Plate at your decided position by using the 3
mounting screws supplied with the product. The word FRONT
faces the front view of the Camera unit.
3. Insert the DC plug through the Wire Through Hole of the
Mounting Plate.
4. Sandwich the wire between the Wire Positioning Clips.
5. Insert the DC plug into the DC jack at the bottom of the Camera
unit.
6. Line-up the Wire Positioning Clip with the Wire Through Hole of
the Mounting Plate.
7. Turn the Camera unit clockwise to lock the Camera unit securely
into position.
8. If the Camera unit is mounted on the ceiling, turn the Lens
Compartment approximately 60 degrees vertically to receive a
right side up image at the Monitor unit.
10
RECHARGING THE UNIT
( NOT APPLICABLE FOR JY-229TC & JY-238T)
Camera and monitor of your 2.4GHz Color LCD A/V Wireless Monitor
have built-in battery recharging circuit. Make sure only rechargeable NiMH
batteries are inside the battery compartment before plug in AC/DC adaptors.
The unit will be in recharging mode with the AC/DC adaptor plug in.
JY-238R Monitor unit, can be recharged by either plug in the AC/DC
adaptor or place on the Recharging Base (optional), which has the AC/DC
adaptor connected.
The Recharging Base will have the green indicator on while the AC/DC
adaptor is connected. The indicator will turn to orange color while
recharging or the monitor is switched on.