Use and Care Manual

Table Of Contents

Step 1: Secure chair back (B) to left arm (A1)

with 2 washers (J) and 2 screws (H) by using

allen wrench (M). Do not fully tighen now.

Note: The hole of chair arm must face

inside of seat.

Step 2: Secure right arm (A2) to the other side of

assembled chair back (B) with 2 washers (J) and 2

screws ( H) by using allen wrench (M). Do not fully

tighen now.

Step 3: Secure seat panel (C) to assembled chair

arms (A2.A2) with 4 washers (J) and 4 screws

(I) by using allen wrech (M). Do not fully

tighen now.

Step 4: Secure seat panel (C) to assembled chair back

(B) with 2 washers (J) and 2 screws (I) by using

allen wrench (M). Do not fully tighten all the screws