Use and Care Manual

Email: [e-mail]
TEXT: 1 628-263-4608
4
Step 5: Secure support bar (F) to swivel base ring (E)
with 2 screws (H) and 2 washers (J) by using allen
wrench (M). Do not fully tighen now.
Step 6: Secure support bar (G) to swivel base ring (E)
with 3 screws (H) and 3 washers (J) by using allen
wrench (M). Tighten all screws on Step 5&6 now.
Step 8: Attach assembled swivel base (E) to rocking
base (D) with 12 washers (J&L), 4 screws (I) and 4 nuts
(K) by using allen wrench (N) and spanner (O). Verify
the alignment and adjust, fully tighten all the screws
now.
Step 7: Attach rocking base (D) to chair arms (A1.A2)
with 4 nuts (K) and 4 screws (I) by using spanner (N)
and allen wrench (M). Do not fully tighen now.
Step 9: Put cushion (P&O) onto chair and now it is
ready to use.