FEDERAL COMMUNICATIONS COMMISSION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection.
Section 1. Introduction Voodoo Banshee incorporates leading-edge 3D graphics and extremely fast 128-bit Windows GUI/Video Acceleration into a single chip. Voodoo Banshee is upward compatible with all the hundreds of 3D titles. It continues 3Dfx heritage to deliver 100 Pixels fill rate and over 4 million triangles per second performance. It also provides advanced 3D features with the universal requirement of all serious game developers : no degradation performance and quality.
(3) 16-bit integer and floating-point Z-buffering with bi ng (4) Transparency and chrome-key with dedicated color mask (5) Alpha blending of source and destination pixels (6) Sub-pixel and sub-telex correction to 0.4x0.
| Section 3. Software Installation 3-1. System Requirements : PC with a Pentium, Pentium II, or Pen |6MB of RAM m Pro Processor and a free AGP slot 3-2. Driver Installation . 3-2-1. Windows 98 NOTICE: It Is recommend that the video mode be set to standard VGA before beginning this installation. To configure your Windows 98 driver once it is installed. . Windows 98 should already be installed. 2. Power down the computer and install the 3D Banshee card. w . Reboot the computer and start windows $6.
8. Click on Settings nd click on Advanced Properties {Figure 3} 8. Click on (Change under Adapter sub-menu.
of (9 2m8ry) {g glam) (9 amd) xen) uo YI vag oT ELLIPSOIDAL 943 [7 10181) © Avionics uo Noi "11 (g omg) [xan] nok BAUD a1)
. Click on [Have Disk (Figure 7) Update Device Driver Wizard Silent ho manufacture and ree of sous sherbets divas: Wgaufave s contains the updated diver, click Have Disk.
. Select CD drive DAwin9S\3dbsspbanshee ind] file . (Figure 9 ~ Figure 10) t shew. Insert the manufacturer's installation disk into the drive selected, and then click OK.
3-2-2, Windows NT 4.0 NOTICE: If you are first time to start windows NT 4.0, please select VGA Mode from boot menu. 1. Niter you login the Windows NT 4.0, the default display are standard VGA mode, now you need to Install the 3D Banshee to active the driver. 2. Click on Start]Menu. {Figure 1) 3.
8. Please click on Have Disk button. {Figure 5) 9.
ge] ede jo send comps] | ewe dens, “gluon [EOE ue UD (29 amg) BLAT) S5IGyArTT) : Cape i wear EC ak AT Apes) 104 51 lap ay | earn saws 3gEsaa0e Jou St \Y bod men Po a (FIO [xT 3 PEL
GLEE 14. Now you go back to Display Type Menu, Click onf Clods button. (Figure j0) 15. Under Display Properties Menu, just click on Close J (Figure 11) mutton, the system will prompt you to restart Windows. Cows. ! Cae.