Owner's Manual

Product Description
1. Forehead Cover
2. Probe
3. M Button
4. Button
5. S Button
6. Battery Cover
7. Forehead Button
3
Basic Functions
LCD Display Introduction
4
5
Real Time Clock
Ear/Forehead
Temperature Mode
Object Temperature
Mode
The object mode shows the actual, unadjusted surface
temperatures, which is different from the body temperature. It can
help you to monitor if the object temperature is suitable for the baby
or patient, for example the baby's milk.
→ Please see the section to learn how to
measure the object temperature.
Illustration For Use
The real time clock will be recorded with the memory function and
help you to recognize each measurement result.
→ Please see the System Setting section to learn how to
setup the time in the first use.
The thermometer has been designed for practical use. It's not
meant to replace a visit to the doctor. Please also remember to
compare the measurement result to your regular body temperature.
→ Please see the section to learn how to
measure the body temperature.
Illustration For Use
Memory Mode
There are 30 memories for ear/forehead/object measurements.
Each memory also records the measurement date/time/mode icon.
/ Switch℃ ℉
Please see the Temperature Scale Setting section to learn
how to change between Celsius and Fahrenheit.
6
System Setting
When using thermometer for the first time, please set the parameters
of the thermometer.
1. Press BUTTON to turn on the thermometer(See Figure1).
2. Press and hold the S BUTTON for 5 seconds
3. Press and release S BUTTON to select the unit(See Figure2).
4. When the preferred unit on the display, press M BUTTON t
to enter into unit
changing mode.
o
enter into the real time clock setting mode.
Figure 2
6
7
1
2
4
5
3
Bluetooth sign
Ear mode sign
Forehead mode sign
Unit sign: ℃ or ℉
Temperature result
Time and date
Memory Sign
Object mode sign
Beep sign
Measuring sign
Figure 1
Beep Sound
The thermometer allows to turn on/off beep sound by touching
S BUTTON.
Low voltage sign
Bluetooth
The thermometer allows to turn on/off the bluetooth function.
The Bluetooth transmission starts after a measurement is taken
(the screen displays neither Lo nor Hi)or after entering the memory
mode for the first time.
Set the time format
①
The device can display the time
in either an AM/PM (12-hour) or
a 24:00(24-hour) format. Press
and release S BUTTON to select
the format. With the preferred
time format on the display, press
M BUTTON, the Hour figure is
flashing automatically.