Owner's Manual

7
14
Illustration For Use
Illustration For Use
13
12
11
Some people produce different readings in their left and right ear.
In order to record temperature changes, always measure a person’s
temperature in the same ear.
As ear wax can affect the measurement, you should clean the ear
before measuring if necessary.
1. Remove the forehead cap.
2. Press the BUTTON to switch on the thermometer and the
display is activated to show all segments.
3.
4. Make sure that the sensor tip and the ear canal are clean. As
the ear canal is slightly curved, you have to pull the ear slightly
up and backwards before inserting the sensor tip.(See Figure 6)
When using the thermometer on infants under age 1, pull the
ear up making sure the sensor faces the eardrum.(See Figure 7)
When using the thermometer on individuals over the age of 1,
pull the ear back making sure the sensor faces the eardrum.
(See Figure 8).
5. Press the BUTTON to start the measurement.
●
●
●
●
After self-checking, the last measurement (See Figure 5) appears
on the screen with beeps, so you can start a new measurement.
To measure ear temperature:
Figure 6
6
measuring is signalled by a short beep.
Note: A waiting period of 20 seconds between testing is
recommended to avoid excessive cooling of the skin.
7. The thermometer will shut off automatically after 60 seconds
of inactivity. To prolong battery life, press and hold the
BUTTON for 5 Seconds to turn the thermometer off.
. The measured value appears on the display and the end of the
1. Press the BUTTON to switch on the thermometer.
2. Hold down the M BUTTON and then press the S BUTTON
immediately for 3 seconds to switch to object temperature
mode( appears onthe LCD display).
3. Aim the thermometer at the center of the object you want to
measure with a distance of 1 to 2 cm.
4. Press the BUTTON or the button on the left to start measurement.
5. The measured value appears on the display and the end of the
measuring is signalled by a short beep.
6. To exit object temperature mode, hold down the M BUTTON and
then press S BUTTON immediately again for 3 seconds.
7. The thermometer will shut off automatically after 60 seconds
of inactivity. To prolong battery life, press and hold the
BUTTON for 5 Seconds to turn the thermometer off.
Remarks:
This mode shows the actual, unadjusted surface temperatures,
which is different from the body temperature.
Illustration For Use Illustration For Use
Figure 8
To measure object temperature:
X
√
Figure 7
Figure 5
Figure 4
1. Press the BUTTON to switch on the thermometer and the
display is activated to show all segments.
2.
3. Place the probe with the forehead cap fitted on the temple.
4. Press and hold the button on the left to start measurement.
5. Move the thermometer smoothly over the forehead to the other
temple and back, the highest value appears on the display.
6. After releasing button, the result is shown and the end
of the measuring is signalled by a short beep.
7. The thermometer will shut off automatically after 60 seconds
of inactivity. To prolong battery life, press and hold the
BUTTON for 5 Seconds to turn the thermometer off.
After self-checking, the last measured temperature appears on the
display screen with beeps, so you can start a new measurement.
(See Figure 4)