Owner's Manual

7
Illustration For Use
13
14
12
11
Illustration For Use
Illustration For Use
Bluetooth requirements
The thermometer requires a bluetooth device with:
. Bluetooth 5.0 or later
. Android 6.0 or later
. IOS 10.0 or later
And works with:
. iphone , iPod, iPad
. Android Phones and Tablets
Using for the first time
1. Download the "JoyHealth" App from Website or APP Store (Such
as Apple Store).
2.Open the App on your phone or tablet. If requested, you should
enable Bluetooth on your device. You can enable Bluetooth under
the Settings menu on your smart phone or tablet.
3. Create a new user login, or login with your existing user name and
password.
4. Selection device “Thermometer”.
Illustration For Use
After measurement:
1. Power off: Device will automatically shut off if left idle for
more than to extend battery life.
2. Clean the probe after each use to ensure an accurate reading.
(See the section of Care and Cleaning for details.)
30 seconds
Figure 4
1. Press the Test Button, The display is activated to show all
segments.
Note: Do not remove the thermometer from the forehead before
hearing .
3. Read the temperature on the display.
4.
After self-checking Figure 2 appears on the display
screen with voice, so you can start a new measurement.
2. Aim the thermometer at the center of the forehead with a distance
less than cm (See figure 3) and then press the Test Button.
voice
8
Device will automatically shut off if left idle for 30 seconds.
To measure forehead temperature:
Figure 3Figure 2
To measure object temperature:
1.
the object temperature after
(see figure 4)
2. Aim the thermometer at the center of the object you want to
measure with a distance
e temperature on the
display.
4
Press the Test Button to turn on the thermometer, you can take
going into object measurement mode.
. Device will automatically shut off if left idle for 30 seconds.
less than cm.
3. Press the Test Button and then read th
8
How to change the forehead mode and object mode:
How to turn on or off sound:
You can press the to turn on or off sound.Setting Button
You can press and hold Setting Button to switch the mode between
Forehead mode and Object mode.