Owner's Manual

17
1. The right ear reading may differ from the reading taken at the
left ear. Therefore, always take the temperature in the same ear.
2. The ear must be free from obstructions or excess earwax buildup
to take an accurate reading.
3. External factors may influence ear temperatures such as:
lying on one ear or the other
their ears covered
exposed to very hot or very cold temperatures
recently swimming or bathing
In these cases, remove the individual from the situation and wait
20 minutes prior to taking a temperature.
4. For persons wearing hearing aids or ear plugs, remove the device
and wait 20 minutes prior to taking a temperature.
5. When using the thermometer on infants under age 1, pull the
ear up making sure the sensor faces the eardrum.
(See Figure 6)
●
●
●
●
15
16
Temperature Taking Hints
18
Illustration For Use
Bluetooth requirements
The thermometer requires a bluetooth device with:
. Bluetooth 5.0 or later
. Android 6.0 or later
. IOS 10.0 or later
And works with:
. iphone , iPod, iPad
. Android Phones and Tablets
Using for the first time
1. Download the "JoyHealth" App from Website or APP Store (Such
as Apple Store).
2.Open the App on your phone or tablet. If requested, you should
enable Bluetooth on your device. You can enable Bluetooth under
the Settings menu on your smart phone or tablet.
3. Create a new user login, or login with your existing user name and
password.
4. Selection device “Thermometer”.
Illustration For Use
Match your thermometer with a Smart Device
1. If this is your first time using it, bind first.Open "SETTING"
menu,choose“Bind and unbind device" and select the
appropriate model.
The date and time on your thermometer will automatically be
updated when it's connected with your phone.
2. Confirm that your thermometer is connected successfully.
When your thermometer is connected successfully to your smart
phone, the “ ” symbol stop flashing and keep showing.
Transfer your readings
1. As soon as your measurement is finished, open the app on
your smart phone to transfer the readings.
Note: On the matched smart phone, Bluetooth must be enabled.
2. You can view your temperature readings in the app.
Illustration For Use
After measurement:
1. Power off:
2. Clean the probe after each use to ensure an accurate reading and
avoid cross contamination.
(See the section of Care and Cleaning for details.)
●
● Press Button to turn it off .
Device will automatically shut off if left idle for
more than 1 minute to extend battery life.
BackLight:
In Ear mode:
1. The display will be lighted GREEN for 3 seconds with a happy
face when the unit is ready for measurement and a measurement
is completed with a reading less than 37.3 (99.1 ).
2. The display will be lighted YELLOW for 3 seconds with a happy
face when a measurement is completed with a reading less than
37.8℃(100.0 ).
3. The display will be lighted RED for 3 seconds with a bad face
when a measurement is completed with a reading equal to or higher
than 37.8℃(100.0 ).
In Object mode:
The display will only be lighted GREEN for 3 seconds when the
unit is ready for measurement and a measurement is completed.
℃ ℉
℉
℉