Owner's Manual

Warranty
Thermometer is warranted by manufacture to be free from defects in
material and workmanship under normal use and service for a period
of one year from the date of delivery to the first user who purchases
the instrument. This warranty does not cover batteries, damage to the
probe window, or damage to the instrument caused by misuse,
negligence or accident, and extends to only to the first purchaser of
the product. Additionally this warranty becomes void, if the
thermometer is operated with anything other than this brand
thermometer probe covers.
27
29 30
Service
The thermometer has a limited one year warranty. Do not attempt
to disassemble or repair the thermometer by yourself. Should
service be required during or after the warranty period you must
contact the manufacturer. Repackage the thermometer carefully in
its original packaging or securely pack to avoid damage during
shipping. Include the original sales slip indicating the date of
purchase, a note describing the problem, and your return address.
Send the thermometer prepaid and insured.
The lay operator or lay responsible organization should contact the
manufacturer or the manufacturer's representative:
– for assistance, if needed, in setting up, using or maintaining the
thermometer; or
– to report unexpected operation or events.
Symbol Explanation
28
Calibration
The thermometer is initially calibrated at the time of manufacture.
If the thermometer is used according to the use instruction, periodic
readjustment is not required. However, We recommends checking
calibration every two years or whenever clinical accuracy of the
thermometer is in question. Please send the complete device to the
dealers or manufacturer.
The above recommendations do not supersede the legal requirements.
The user must always comply with legal requirements for the control
of the measurement, functionality, and accuracy of the device which
are required by the scope of relevant laws, directives or ordinances
where the device is used.
A clinical summary and procedures for checking calibration are
available upon request.(Turn on the thermometer and press the
button long time until entering into calibrate mode, software version
will be displayed.)
Caution
95%
15%
13 1
o
F
-1 3
o
F
Manufacturer
Manufacturing Date
Direct Current
Batch Code
Storage and Transportation Temperature
Limit: -13℉ ~131℉ (-25℃ ~55℃)
TYPE BF APPLIED PART
Refer to instruction manual/ booklet
General symbol for
recovery/ recyclable
Disposal of this product and used batteries should be
carried out in accordance with the national regulations
for the disposal of electronic products.
106kPa
70 k Pa
Atmospheric pressure limitation
Storage and Transportation
15%~95%RH
Humidity limitation:
The first num.2:Protected against solid foreign objects of 12,5
mm and greater.
The second num.2:Protection against vertically falling water
drops when ENCLOSUREtilted up to 15°.
IP22