Owner's Manual

7
14
13
12
11
To measure forehead temperature:
Illustration For Use
1. Press the BUTTON, The display is activated to show all
segments.
Aim the thermometer at the center of the forehead with the
distance less than 5cm(See figure 3) and then press the
START BUTTON.
Note: Do not remove the thermometer from the forehead before
hearing .
3. Read the temperature on the display.
4. Press the BUTTON to turn off.
After self-checking Figure 2 appears on the display
screen with voice, so you can start a new measurement.
2.
voice
Figure 3Figure 2
Illustration For Use
To measure object temperature:
1.
the object temperature after hearing .(see figure 4)
2. Aim the thermometer at the center of the object you want to
measure with The distance less than 5cm.
3. Press the START BUTTON and then read the temperature on the
display.
4. Press the BUTTON to turn off.
Press the BUTTON to turn on the thermometer, you can take
voice
Figure 4
How to change the forehead mode and object mode:
You can press / BUTTON to switch the mode between
Forehead mode and Object mode.
Illustration For Use
After measurement:
1. Power off: Device will automatically shut off if left idle for
more than 1 minute to extend battery life.
2. Clean the probe after each use to ensure an accurate reading and
avoid cross contamination.
(See the section of Care and Cleaning for details.)
BackLight:
In Forehead mode:
1. The display will be lighted GREEN for 3 seconds with a happy
face when the unit is ready for measurement and a measurement
is completed with a reading less than 37.3 (99.1 ).
2. The display will be lighted YELLOW for 3 seconds with a happy
face when a measurement is completed with a reading less than
37.8℃(100.0 ).
3. The display will be lighted RED for 3 seconds with a bad face
when a measurement is completed with a reading equal to or higher
than 37.8℃(100.0 ).
In Object mode:
The display will only be lighted GREEN for 3 seconds when the
unit is ready for measurement and a measurement is completed.
℃ ℉
℉
℉
Bluetooth requirements
The thermometer requires a bluetooth device with:
. Bluetooth 4.0 or later
. Android 6.0 or later
. IOS 8.0 or later
And works with:
. iphone , iPod, iPad
. Android Phones and Tablets
Using for the first time
1. Download the "JoyHeath" App from Website or APP Store (Such
as Apple Store).
2.Open the App on your phone or tablet. If requested, you should
enable Bluetooth on your device. You can enable Bluetooth under
the Settings menu on your smart phone or tablet.
3. Create a new user login, or login with your existing user name and
password.
4. Selection device “Thermometer”.
Illustration For Use
静音要 改成短按 设置键， 长按切换 模式吗
记忆混 测