User's Manual

MHD OBD2 Flasher Wifi Enet Module User Manual

Appendix Disclaimers

The contents of this document are subject to change without notice. Autosvs Technology reserves

the right to make changes, without notice, in the products, including circuits and/or software,

described or contained therein. Information contained in this document regarding device

applications and the like is intended through suggestion only and may be superseded by updates.

It is your responsibility to ensure that your application meets with your specifications.

Autosvs Technology warrants performance of its hardware products to the specifications applicable

at the time of sale in accordance with Autosvs Technology’s standard warranty. Testing and other

quality control techniques are used to the extent Autosvs Technology deems necessary to support

this warranty. Except where mandatory by government requirements, testing of all parameters of

each product is not necessarily performed.

Autosvs Technology assumes no responsibility or liability for the use of any of these products,

conveys no license or title under any patent, copyright, or mask work right to these products, and

makes no representations or warranties that these products are free from patent, copyright, or

mask work infringement, unless otherwise specified.

Autosvs Technology products are not intended for use in life support systems, appliances or

systems where malfunction of these products can reasonably be expected to result in personal

injury, death or severe property or environmental damage. Autosvs Technology customers using or

selling these products for use in such applications do so at their own risk and agree to fully

indemnify Autosvs Technology for any damages resulting from such use.

All products are sold subject to Autosvs Technology 's terms and conditions of sale supplied at the

time of order acknowledgment. All trademarks are the property of their respective owners.

NB Warning:

Manufacturer's Name: JR Auto Performance Inc.

Sample Description: MG Flasher Enet Wifi

Trade Mark: /

Model number: MG Flasher Enet Wifi

Operating Temperature: -10° C to 40° C

Wireless specification:

2.4G WIFI: Max power 14.38dbm in frequency band 2412-2462MHz

This product is a fixed location. To comply with RF exposure requirements, a minimum separation

distance of 20cm must be maintained between the user’s body and the device, including the

antenna. The device complies with RF specifications when the device used at 20cm from your body.

Use only the supplied or an approved antenna.

This device in compliance with the essential requirements and other relevant provisions of

Directive 2014/53/EU. All essential radio test suites have been carried out.