Operation Manual

192
Canceling center relocation
Canceling center relocationCanceling center relocation
Canceling center relocation
(a) Push the soft key ＤＩＳＰＬＡＹ
ＤＩＳＰＬＡＹＤＩＳＰＬＡＹ
ＤＩＳＰＬＡＹ .
(b)
Push the soft key 2 and select first ＣＥＮＴＥＲ
ＣＥＮＴＥＲＣＥＮＴＥＲ
ＣＥＮＴＥＲ and then Ｏ
ＯＯ
ＯＦＦ
ＦＦＦＦ
ＦＦ ＣＥＮＴ
ＣＥＮＴＣＥＮＴ
ＣＥＮＴ .
Center relocation has been canceled.
3.3.23 Controlling power consumption of the radar
In order to control power consumption, the timed transmission function is used.
By using the timed transmission function, the system repeatedly alternates between
transmission mode and standby mode.
Setting the transmission time
Setting the transmission timeSetting the transmission time
Setting the transmission time
(a) Select "10", "20", or "30" in the line "TX PERIOD" - the menu "DISPLAY".
The transmission time is designated by the rotation of the scanner unit.
Setting the standby time
Setting the standby timeSetting the standby time
Setting the standby time
(b) Select "3", "5", "10", or "15" in the line "STBY PERIOD" - the menu "DISPLAY".
The standby time is designated as 3 minutes, 5 minutes, 10 minutes or 15
minutes.
Commencing timed transmission
Commencing timed transmissionCommencing timed transmission
Commencing timed transmission
(c) Select "ON" in the line "TIMED TX" - the menu "DISPLAY".
When this is undertaken, timed transmission begins.